Port Forwarding on DSL Modem / Router
These steps are for FiberHome AN1020-25 ADSL Wireless Modem provided by PTCL Broadband.
Open http://192.168.1.1/ in your Web Browser.
A dialog will appear asking for Username and Password.
Enter admin in both Username and Password.
If the Username and Password are correct, you will see a page like below:
Now, click on “Advanced Setup” and then click on “NAT“:
Click on “Add” and enter the Local IP andΒ Port you want to forward.
Here I am forwarding Port Number 27015Β ofΒ UDP which is default port for Counter-Strike 1.6 Server.
This port is being forwarded to my computer’s IP which is 192.168.1.2
In case you are setting up a Web Server like WAMP/XAMPP, the default HTTP Port Number is 80 ofΒ TCP
Click “Save/Apply”.
Your port should be forwarded successfully now!
- Note:
As of March, 2015 PTCL has blocked port forwarding for Dynamic IP DSL connections. For Port Forwarding to work, you must order Static IP from PTCL.
Good tut.. π
Thanks π
[…] of router models with different port forwading methods each. Here are steps for some routers: http://www.counterstrike.com.pk/2014/03/port-forwarding-on-dsl-modem-router/ For other routers, just google about it and you will find the […]
ADMIN
π
bhaiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii hellllpppppppp me plzzzzzzzzz plzzzz
Thankyou, was asking this from everyone. π
TZ HELP Me, the username and password are not working. :3
USER NAME IS : admin
and password is in your device steaker
tz bhai meray advanced setting m nai ati h nat ka option blky basic m nat ka option ata h help me please
anyone can please make a server for me using teamviewer
i would pay u for that
my cntct no 03235800688
No need to pay, install it yourself!
Follow instructions on this link: http://www.counterstrike.com.pk/2014/03/how-to-setup-counter-strike-1-6-server/
kisi serwer ki ip hi de do
182.180.66.151:27015
how do i port forward in new ptcl router?
it is latest 2014 router of ptcl
thanx
Check your router model or its pic if possible and post it here!
Yaar Mine Is Different :(.. Plz Help
Check your router model or its pic if possible and post it here!
Pic Can’t Be Uploaded, But It Is Echolife HG510a
what to type in custom servers
Write anything. It doesn’t matter π
yar tz wapis admin bana na
yar tz mujh admin banao naaaaaaaaaaaaa <3
Message me on facebook!
admin i dont have ptcl connection is this server works on only ptcl connections??????????????
somone make server for me please through teamviver ya ha mera website http://derpyuniverse.enjin.com/
good π
will the internet will be afffected by it ?? means every thing like google fb and etc will work as ideal ??
It depends on your internet speed.
e.g; If you have 1Mb PTCL DSL and you have 10+ concurrent players, you will face slow browsing especially uploads!
Server Kesay Banata hai local area ki ip arehi hai ptcl se net hai is ki setting sahi tariqay se batao plz
I have covered whole details about setting up a server on this link: http://www.counterstrike.com.pk/2014/03/how-to-setup-counter-strike-1-6-server/
Yr dmin help me yr I have th 3g evo winglr modem How do i forward port Plzz Help I did evry thing Else
I will write a tutorial for Port Forwarding on PTCL 3G EVO Nitro, Wingle and CharJi 4G devices very soon.
Till then, you can try playing with Settings page of your Wingle device by entering 192.168.1.1 in your browser.
Good luck!
Do you think if its possible to port foward in Ptcl Charji? it was possible in evo 3g but there is no such option related to port fowarding in charji settings. Please help!
Yes it is possible.
You have to connect the CharJi device directly for that to work.
I haven’t tried this myself but heard about this.
Please try this and let us know.
evo wingl py ports khul jati hain aaram sa par zadatar wo open port checker websites py show nae hoti.. π
Yup but in some device models that option is not present!
brother .. Mere pas UNIVERSAL net hai .. and mene har cheez follow krli hai ..even server b ban chuka hai .. mgr koi bhar wala connct ni kr rha .. mere pas fav mei add horha hai or lan pe b show ho rha hai .. mgr koi frnd connct ni kr pa rha.. and mje ip forward krna nai arhi.. help me pls if u can bro ?
You are using a Cable Net I assume.
This Tutorial is only for DSL users.
Do the following and I will confirm if its possible on your connection or not:
-Open
cmd
-Write the following command and press enter:
tracert 8.8.8.8
-When the command is finished, right-click on that black window, copy all the text and paste it here in comments!
C:\Users\Saimz>tracert 8.8.8.8
Tracing route to google-public-dns-a.google.com [8.8.8.8]
over a maximum of 30 hops:
1 3 ms 4 ms 1 ms 192.168.1.1
2 218 ms 236 ms * google-public-dns-a.google.com [8.8.8.8]
3 209 ms 181 ms 233 ms google-public-dns-a.google.com [8.8.8.8]
Trace complete.
Looks like you are using VPN or you are behind a Cable Network.
Sorry but this tutorial will not work on cablenet using these steps!
On cablenet you will need to contact your network administrator and ask them to do this for you (If they are providing this service)
i have tp link router .. or 198.168.1.1 pe admin username nd pass sb accpt hogaya khul b gaya .. aftr that port forwardng or kis trhan hoge.. pls tel me bro
Do as I have told you in other reply and post back the results.
evo pe kese port forwarding kis tarhan set hogi
On EVO there is no need to Port Forwarding.
You only have to connect EVO with computer and disable your firewall!
yr server kesay banai ga
Follow these instructions: http://www.counterstrike.com.pk/2014/03/how-to-setup-counter-strike-1-6-server/
yr woh kia on nhy horaha h
Yar mera ptcl hai mene server bana liya hai but jab connect karo tou yeh error araha hai
WARNING: UDP_OpenSocket: port: 27015 bind: WSAEADDRINUSE NET Ports: server 27015, client 27005 Could not get TCP/IP address, TCP/IP disabled Reason: WSAENOT
It means your server is already running.
Try closing your game also if its running and try again!
Still not working bro. help.
Completely exit your game and try again.
Or maybe you have opended server console multiple times.
“WSAEADDRINUSE” error occurs only when some other application is using the port 27015.
If you still can’t fix it, edit your START_SERVER.bat file and change the port number from 27015 to 27016 or 27017
Still not working bro..
Message me on http://www.facebook.com/AskTaimoor
I will try to come over Teamviewer and try to sort out the issue!
what do we have to write in custom server…. as u have written cspak… what do we have to write in it??
Write anything in there it doesn’t matter.
what if i am using cable net??
help plzzz
This method will not work on cablenet directly.
You will need to contact your cablenet operator and ask them for this service.
okay
I just bought WD Cloud drive 2tb. Please guide me pic by pic that how to set it up on ptcl router so i can access it from any where in world. I just bought static ip as well. Now i think port forwarding has to be done ? but plz guide so i can set it up
The procedure is almost the same.
Just find out the port of WD Cloud Drive (which would be 80 I guess) and forwarded it using the above steps.
Try accessing your IP from your mobile or any other connection to make sure it is working!
[…] of router models with different port forwading methods each. Here are steps for some routers: http://www.counterstrike.com.pk/2014/03/port-forwarding-on-dsl-modem-router/ For other routers, just google about it and you will find the […]
guys i have qubee sx682 router and dlink dir600L router plz tell me in which i have to forward port and plz tell me how to forward port ? waiting for your answer
I haven’t used that router model yet.
Please message me on http://www.facebook.com/AskTaimoor
I will configure your router and write a post about it for everyone!
Bhai, jo port forwad ka tareqa btaya hay, woi kar raha hun, mgr apki site ka test keh raha hy kay port 27015 is not open..
Actually I have heard that PTCL has blocked Port Forwarding for all normal DSL connections with Dynamic IP.
Now for creating your own server by forwarding, you must have a Static IP.
This is a new rule implement by PTCL on orders on PTA.
I will update this post soon.
give me your facebook name and dp i want to contact you
give me ur facebook name and dp i want to contact you
Contact me on http://www.facebook.com/AskTaimoor
cs sourse 2013 ka port number kya h???
Default port for Counter Strike Source is 27015 UDP
how i make server On Dsl Intearnet connection???????
Read this tutorial to make your own server on dsl connection: http://www.counterstrike.com.pk/2014/03/how-to-setup-counter-strike-1-6-server/
in ip address 192.168.1.1 it does not open admin in both user and password does not work
Which internet connection are you using and what is your router model?
brp mere pas totolink N150RT ispy port frwarding kese hogi???
Try the same procedure after logging in.
Look for menus looking like those above and play with settings hopefully you will get it done π
yar meray pas tp link ki devce hay magar net cabel wala hay kya sv ban gaye ga?
Yes and also no!
Yes, if your cablenet provider is good enough to assign you a static IP on their DHCP server and forwards the ports for you. Yes, buttering and drinks will surely help π
No, if your cable guy is too selfish and doesn’t want to sacrifice his 5 minutes for you or maybe he doesn’t know how to forward ports π
In latter case, you can send him this link so he can read the instructions π
kya hum 27015 k ilawa koi aur port use kr skty hain main 443 use krna chahta hun…
Yes you can use any port you want as long as its available.
As a standard, ports higher than and including 27015 should be used.
I’m wondering why would you want to use 443..!?
Looks like you want to bypass your school firewall and play from there π (Yes that might bypass it)
I’m still curious though!
Glad to see you helping everybody here.
I am setting up web server here by forwarding port 80 of TCP. My dynamic external ip is working on devices connected to my network but when I try to open my external ip outside the LAN, it doesn’t work.
Seems like i have done port forwarding correctly. Do I really need static ip to test the problem OR I have to change something in my Ptcl Smart router settings?
Please take my problem in consideration.
Thanks.
If you are able to access your external IP from within your network, that doesn’t necessarily means that your port forwarding setup is working.
Try opening it from some other network (using your mobile 3g maybe)
If you are using PTCL, you will need a Static IP for forwarding your ports. PTCL have recently disabled port forwarding on all dynamic DSL connections.
Buying the Static IP is the only option!
Thanks Admin, I guess you are right.
But PTCL technical department is stating something different that is if port forwarding is available in your router then you can setup it, we haven’t blocked this. And about Static ip they are telling that you can buy it if you want a permanent ip but you can enable port forwarding without it too. I exactly did port forwarding like you. I checked from mobilink, ufone 3g internets but external ip of my router didn’t load up.
Are Ptcl operators are guessing it and telling wrong? Do I need to check on other Ptcl or witribe router? Or buy a static ip? Or something other?
Actually a few days back a friend of mine had the same issue.
I called the tech support and they said that they have disallowed port forwarding on non-static IP connections and one must have a Static IP for forwarding ports.
Maybe they have removed that restriction now but I am not sure.
If you can manage, try forwarding ports on your neighbors or friends DSL connection and see if it works?
Meanwhile I’ll try to contact someone in PTCL HQ to confirm this!
I checked on my friend’s PTCL connection and got the same issue that I had.
Then I contacted PTCL tech customer support and asked them to setup port forwarding for me, they said you have to use your hand for this or call an IT expert. He told me you can apply port forwarding settings on dynamic connections. I then insist him to confirm that can port forwarding be applied on dynamic broadband connections then after consulting higher authorities he came with the answer that you can only setup port forwarding on static connections.
So I guess I have to fill PTCL bank accounts with Rs.500 more for first month service. I bet that only a few tech people may know about that. I’ll buy it next month to make it precisely confirm.
Yes only a few people know about it because its a recent change without any official announcements from PTCL.
Congratulations for solving the mystery π
salam
meray pass tou NAT mai koi add ka option nai a ra
just virtual circuit and NAT status deactivated
Ws.
That means your NAT is disabled somehow.
You will have to enable your NAT from the WAN menu.
Don’t delete anything in there and write down the changes you make.
Just use your head and if you get stuck somewhere, just ask here π
Glad to see you helping everyone here.
I am setting up web server here by forwarding port 80 of TCP. The dynamic external ip of my ptcl router is working on devices connected to my network but when I try to access my external ip from outside the LAN, it does not load up.
Seems like I have port forwarded it right but what may be the problem. Do I need a static ip to test this OR I am missing a setting of my Ptcl Smart Router.
Take my problem into consideration.
Thanks.
Testing123